AutoSealer
Q. My heat plate is stuck down with a paddle / sealing tray in it. How do I get it out?
Answer: Check fuses or breakers, replace fuses or reset breakers. Breakers may also have to be
replaced.
Q. What maintenance do I need to perform on my AutoSealer?
Answer: Clean filters monthly, oil quarterly, check pressure and return springs. Clean inside of
machine.
Q. The Watlow has "ERR" on the screen. What do I do?
Answer: Error messages (Err1, Err2, Err3, Err4, or IN) usually indicate a problem with the
thermocouple. The thermocouple is a wire attached to the right front of the heat
plate. Disconnect, cut off exposed wire, strip wire and reattach. If that doesn't work
replace thermocouple.
Carts
Q. I need a "new" or "replacement" key for my cart or narcotic box?
Answer: If you have the key provide the number on the face of the key when you call for
replacement or additional key. If the key is lost, provide the number on the face
of the lock when calling, this number should match the lost key. Please provide
your cart serial number at time of call this is helpful to the Technical Support
Team.
Q. What is the difference between a "Master Key" and a "Control Key"?
Answer: A "Master" key will open any lock in that series, i.e. an RxQP Master will open any
RxQP lock. A "Control" key will allow you to remove a core from a lock body.
Q. Ball bearings are falling out of the cart and the drawer doesn't work correctly. How do I fix it?
Answer: Replace the drawer slides in pairs. Please provide serial number and type of cart
when contacting Rx Systems support.
Card Issues
Q. My cards are not sealing, what is wrong?
Answer: First, determine if the cards are heat seal or cold seal. If heat seal, are you using
the correct time, temperature and pressure? If yes to all, contact Tech Support.
If cold seal, are you using the correct sealing tray and small end of roller? If yes to
all, contact Tech Support at 1-800-922-9142.